This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
XH-WCF-14 (A) Usage XH-WCF-14 (A) high temperature centrifugal fan for conveying non-corrosive, the maximum temperature of no more than 550 º C high temperature gas. If the gas dust is too large, dust removal device should be installed in front of the fan inlet, and dust removal efficiency should be greater than 85% to improve the service life of the fan.
Parameters Type A1
Type A2
Type A3
Ordering instructions When ordering, please specify the fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on. The most important factors are volume and pressure.
To make the proper fan selection, you must consider the following system conditions the fan will be subjected to: 1. What is the required airflow? This is rated in cubic feet of air per minute (CFM) or, in metric equivalent, it is rated in cubic meters of air per hour (M³ /Hr). 2. What is the static pressure through the complete system? This is rated in static pressure water gauge (SP) or, in metric equivalent, it is rated in Pascal's (Pa).
3. What is the ambient air temperature outside the fan?
4. What will be the airflow conditions through the fan? A. Clean or dirty (contaminated) air? B. Dry or wet (moisture laden) air? C. Temperature of air? 5. What is the altitude the fan will be operating in?
6. Will the air stream, inside the fan, contain anything that could be explosive or flammable?
7. Will the general location the fan will be operating in contain any type of explosive or flammable material or liquid?
Customized When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service When using our products, If any problems on installation, operation, maintainance...And so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
Company & Brand
KuangFeng fans are built by Zibo Xinhua Fan Co., Ltd. In Shandong, China. XFC has served the mining and industrial field for 24 years.
The factory was founded in 1993 and covers an area of 12, 000 square meters. Products are widely used in boilers, workshops, mines, textiles, oil, chemical, kiln, metallurgy, building materials and other industries, Our main products are mine fan, axial fan, open cotton fan, material transmission fan.
KuangFeng Fans has a wide selection of fans available, from 0.25 horsepower to 1120 horsepower and from 0.98 inch diameter to 11 inch diameter(impeller diameter). Contact us to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
KuangFeng Fan manufacture 200 series and more than 1, 200 kinds of industrial fans. All include heavy-duty designs for industrial applications. We manufacture axial fans, centrifugal fans, mine fans and miniature fans. All fans below 600mm(impeller size) are direct driven. All fans above 600mm are available in both direct driven or belt driven models. All models are available with cast aluminum, steel or stainless steel propellers. All models can also be manufactured in all aluminum or all stainless steel construction.
We understand the harsh environments in which fans are used. KuangFeng fans will meet and exceed the demands of your mine or tunnel project, other industrial factory.
Delivery & Package
Packing Details
Complete sets of supply Fan 1, adjustable door 1, matched motor 1, the motor rails 1 (2 sets), the foundation bolts 1, motor pulley 1, triangle tape 1.